Flooring 101

Why Hardwood Floors Develop Gaps in Winter

Published

November 1, 2026

by Joe Scerri, Owner

Why Hardwood Floors Develop Gaps in Winter

As winter approaches in New York, homeowners may begin noticing small gaps between their hardwood floorboards. Floors that appeared tightly fitted during the warmer months can suddenly develop visible spaces, raising concerns about installation quality, aging materials, or potential damage.

‍

Fortunately, seasonal gaps in hardwood flooring are often a natural response to changing indoor environmental conditions. Wood is a hygroscopic material, meaning it absorbs and releases moisture as the surrounding humidity changes.

‍

Understanding why these gaps develop, how to minimize them, and when professional attention may be necessary can help homeowners maintain their hardwood floors throughout the colder months.

‍

Why Does Hardwood Flooring Shrink in Winter?

The primary reason hardwood floors develop gaps during winter is a decrease in indoor relative humidity.

‍

During colder months, outdoor air generally contains less moisture. When that air enters a home and is heated, its relative humidity decreases unless additional moisture is introduced.

‍

As indoor air becomes drier, hardwood flooring gradually releases moisture into the surrounding environment. This causes the wood to shrink, particularly across the width of each floorboard.

‍

Even small dimensional changes can become noticeable when they occur across an entire hardwood floor.

‍

For example, individual planks may contract slightly, creating narrow spaces between adjacent boards. These gaps often become more noticeable during periods of prolonged indoor heating.

‍

When humidity increases again during spring and summer, the flooring may absorb moisture and expand, reducing or closing the seasonal gaps.

‍

‍

How Indoor Humidity Affects Hardwood Floors

Maintaining consistent indoor humidity is one of the most effective ways to reduce seasonal movement in hardwood flooring.

‍

Wood naturally adjusts its moisture content in response to the surrounding environment. When humidity rises, hardwood absorbs moisture and expands. When humidity falls, it releases moisture and contracts.

‍

These changes are normal, but large or frequent fluctuations can contribute to visible gaps, cupping, or other dimensional changes.

‍

Many hardwood flooring manufacturers recommend maintaining indoor relative humidity within a range of approximately 30% to 50%, although specific recommendations vary by product.

‍

Homeowners should always follow the environmental guidelines provided by their flooring manufacturer.

‍

Using a hygrometer to monitor indoor humidity can help identify conditions that may contribute to excessive seasonal movement.

‍

In some homes, a properly maintained humidifier can help reduce excessively dry winter conditions. However, adding too much moisture can create other problems, so humidity should be controlled rather than increased without monitoring.

‍

Are Winter Gaps in Hardwood Floors Normal?

Small gaps that appear during winter and diminish during warmer, more humid months are generally considered normal seasonal movement.

‍

This is especially common with solid hardwood flooring, which responds to moisture changes throughout its entire thickness.

‍

The visibility of these gaps can depend on several factors, including:

  • Wood species: Different hardwood species expand and contract at different rates.
  • Plank width: Wider boards can experience greater absolute dimensional changes than narrower boards under similar conditions.
  • Indoor humidity: Extremely dry conditions can increase shrinkage.
  • Flooring construction: Solid and engineered hardwood respond differently to environmental changes.
  • Installation conditions: The moisture content of the flooring and subfloor during installation can influence future movement.

‍

A small, relatively uniform gap that appears seasonally is usually less concerning than a large or irregular gap that remains visible throughout the year.

‍

Do Engineered Hardwood Floors Develop Winter Gaps?

Although engineered hardwood is generally more dimensionally stable than solid hardwood, it is not completely immune to seasonal movement.

‍

Engineered hardwood consists of a genuine hardwood surface bonded to a multilayer core. This construction helps reduce expansion and contraction compared with traditional solid hardwood.

‍

However, engineered flooring still contains wood and can respond to changes in temperature and humidity.

‍

Depending on the product, installation method, and environmental conditions, homeowners may notice minor gaps between engineered hardwood planks during particularly dry periods.

‍

Maintaining the indoor conditions recommended by the manufacturer remains important for both solid and engineered hardwood flooring.

‍

‍

How to Prevent Excessive Gaps During Winter

While seasonal wood movement cannot be eliminated entirely, homeowners can take several steps to minimize excessive gaps and maintain more consistent flooring conditions.

‍

Maintain Consistent Indoor Humidity

Monitor indoor relative humidity using a hygrometer and keep conditions within the flooring manufacturer's recommended range.

‍

Avoid allowing indoor air to become excessively dry during extended heating periods.

‍

Use a Humidifier When Appropriate

In homes where winter humidity regularly falls below the recommended range, a properly maintained humidifier may help stabilize indoor conditions.

‍

Whole-home humidification systems or appropriately sized room humidifiers can be considered depending on the home's heating system and layout.

‍

Avoid Sudden Environmental Changes

Large fluctuations in indoor humidity can contribute to repeated expansion and contraction.

‍

Maintaining reasonably consistent heating and humidity conditions throughout the winter helps reduce unnecessary stress on hardwood flooring.

‍

Follow Proper Flooring Maintenance Practices

Avoid excessive wet mopping or introducing unnecessary moisture onto hardwood surfaces.

‍

Use cleaning products and methods recommended by the flooring manufacturer to protect the finish and reduce the risk of moisture-related damage.

‍

When Should Hardwood Floor Gaps Be Repaired?

Not every gap requires repair. In fact, filling normal seasonal gaps during winter can create problems when the wood expands again.

‍

If a gap is filled while the flooring is contracted, subsequent expansion may push against the filler, causing cracking, displacement, or other surface issues.

‍

Homeowners should generally monitor small seasonal gaps before attempting permanent repairs.

However, professional evaluation may be appropriate when:

  • Gaps remain large throughout the year.
  • Individual boards are loose or shifting.
  • Gaps are unusually wide or irregular.
  • The flooring shows additional signs of damage.
  • Significant gaps appear shortly after installation.

‍

These conditions may indicate installation issues, excessive moisture fluctuations, or other underlying problems that require closer inspection.

‍

An experienced flooring professional can help distinguish normal seasonal movement from conditions that may require corrective work.

‍

‍

Protecting Hardwood Floors During New York Winters

Winter conditions in New York City and Westchester County can create challenging indoor environments for hardwood flooring.

‍

Heating systems, dry outdoor air, and fluctuating indoor humidity can all contribute to seasonal movement.

‍

Homeowners who monitor humidity, follow manufacturer maintenance recommendations, and address unusual flooring changes early can help preserve the appearance and performance of their hardwood floors.

‍

Seasonal gaps are not necessarily a sign of poor flooring quality or improper installation. In many cases, they are simply a natural characteristic of real wood.

‍

Hardwood Flooring Guidance From Scerri Quality Wood Floors

At Scerri Quality Wood Floors, we understand the importance of selecting and maintaining hardwood flooring that performs well throughout changing seasons.

‍

Whether you're experiencing unusual gaps in existing hardwood floors, considering refinishing, or planning a new flooring installation, understanding how wood responds to its environment is essential.

‍

We work with homeowners throughout New York City and Westchester County to explore hardwood flooring solutions suited to their spaces and long-term needs.

‍

Contact Scerri Quality Wood Floors to discuss your hardwood flooring concerns and explore your available options.

Contact Us →

‍

Leave it to the Pros

We specialize in providing custom, handcrafted hardwood flooring. Gone Finishing handles everything from sourcing, design, installation, and finishing.