Flooring 101

How to Choose Hardwood Flooring for a Whole-Home Renovation

Published

November 11, 2026

by Joe Scerri, Owner

How to Choose

When you’re renovating several rooms at once, it’s easy to choose hardwood based on the room you’re most excited about. A floor that looks right with your new kitchen cabinets also has to work with the light in the living room, the trim in the hallway, and the staircase you see from the front door. Start by looking at how those spaces connect.

‍

Decide where the hardwood will run

Take a floor plan and mark every room where you want hardwood. Include hallways, landings, and any rooms where you’re keeping the existing floor. Then walk through the house and look at what you can see from the entry, the kitchen, and the foot of the stairs.

‍

In an open kitchen and living area, carrying the same hardwood through both rooms can make the space feel connected. If you want a different pattern in a dining room or entry, look for a natural place to make that change, such as a doorway or cased opening. Seeing the transition on the floor plan makes it easier to discuss with your installer.

‍

Choose a wood that works with the materials you’re keeping

Start with the parts of the home that are already decided. That might be the kitchen cabinets you’ve ordered, original wood trim you’re keeping, or the stone around your fireplace. Bring a cabinet door or tile sample when you shop for flooring so you can compare the materials side by side.

‍

Look at several boards when you can. A single sample might show a quiet stretch of grain, while a full floor can have noticeable variation from board to board. If your cabinets and countertops already have a strong pattern, check whether you like that variation next to them. Then take the samples into the hallway or another room with different lighting before making the final selection.

‍

‍

Plan the staircase with the flooring

If your stairs are visible from the main living area, decide early how you want them to relate to the new floor. You might want the treads to blend with the hardwood at the landing, or you might keep the existing staircase and choose a floor that complements it.

‍

If matching is important, ask your contractor to show you the flooring sample next to a sample of the stair tread. That’s also a good time to review how the top step will meet the upstairs flooring and whether any stair or landing pieces need to be ordered separately.

‍

Identify the transitions before you order

Walk the rooms with your flooring contractor and point out every place where hardwood will meet another surface. That could be tile at a mudroom door, an existing floor in a bedroom, or stone around a fireplace. Ask how the two surfaces will meet and what the transition will look like when you’re standing in the room.

‍

If you’re renovating in phases, show your contractor where this phase will end and where the next one will begin. A hallway that connects both phases is worth discussing early, especially if you want the board direction and layout to carry through when the next rooms are ready.

‍

Bring your floor plan to the showroom

If you’re choosing hardwood for a whole-home renovation, bring your floor plan, a few photos, and any cabinet or tile samples you already have to Scerri Quality Wood Floors. We can look at the rooms together and help you narrow down the wood, plank width, and color before you make a decision.

‍

Contact Us →

Related Blogs: A Homeowners Guide, Can you Refinish Engineered Hardwood?.

Leave it to the Pros

We specialize in providing custom, handcrafted hardwood flooring. Gone Finishing handles everything from sourcing, design, installation, and finishing.